Metal Porch Roof Kit – Are you in the market for a new roof? If so, then you are going to discover there are lots of alternatives out there in the roofing industry. These choices can range from several variants of asphalt shingle kinds to a lot of variations of alloy panels. Among the numerous questions which are presented to a professional contractor would be ” can metal roof be installed over shingles?” . The easy answer is yes. We will analyze these steps in greater detail to help determine if retrofitting a metal roof over an present asphalt shingle roof is a complex idea.
There are numerous things you should consider before deciding to install a metal panel roof over an present asphalt shingle roof. The very first thing that must be determined is if the roof plywood or plank board decking is secure and solid beneath the current roof. Essentially, the roof tiling should not be damaged by water entering the old roof in any pinhole or some other penetration inside the subject of the roof. This will require a small investigative work before installing the new metal roof. It’s highly recommended, to inspect all roof decking and framing out of the attic side of the roof.
metal porch roof kit
One has to search for dark stains, moldy stains, water trails on roof or plywood tiling, and or some cracked or split rafters. This needs to be performed with great care, for a single error can damage your ceilings or lead to substantial harm to oneself. New 1×4 wood strips have to be installed horizontally and vertically every 24 inches throughout the roof plane on the horizontal from bottom to top. Following this is complete and a holistic approach to the entire roof, then, now is the time to install the roof panels.
metal porch roof kit
Be cautious that all roof penetrations might have to be flashed with flashing glasses which will work with the metal panel selected for the roofing application. In this step, picking the metal panel is critical to the wellbeing of roof lifetime. You will find metal panels which screw through to that would on the face of the metal that’s simply nothing more than fancy barn tin. The problem with elaborate barn tin panels is that the rubber dishwashers will dry rust and fail, thus, developing a roof leak that can undermine all of the reason a metal roof has been selected to start with.
An easy way to avert the face stained roof material would be to use a concealed fastener metal panel. These kinds of panels are called standing metal seam. It’s highly recommended when picking a metal roof to consider durability. Succinctly expressed, a concealed fastener panel will last the entire life of the alloy with minimal chance of leaks other than failing roof penetrations over time.This is normal to all roof types.