Mechanically Seamed Metal Roofing – Are you in the market for a new roof? If this is so, then you are going to find there are many options out there in the roofing market. These choices can vary from several variants of asphalt shingle kinds to a lot of versions of metal panels. Among the many questions which are introduced to an expert contractor is ” can metal roof be set up over shingles?” . The simple answer is yes. The dichotomous nature of installing metal over an present shingle roof requires many steps. We’ll examine these steps in greater detail to help determine if retrofitting a metallic roof over an present asphalt shingle roof is a complex idea.
There are several things you must consider before deciding to install a metal panel roof over an present asphalt shingle roof. The very first thing that must be determined is if the roof plywood or board board decking is solid and secure underneath the current roof. Essentially, the roof decking shouldn’t be ruined by water entering the old roofing at any pinhole or some other penetration within the field of the roof. This will require a small investigative work prior to installing the new metal roofing. It’s highly recommended, to inspect all of roof decking and framing out of the attic side of this roofing.
standing seam metal roofing
One must search for dark spots, moldy spots, water paths on plywood or roof decking, and or some cracked or split rafters. This should be done with great care, for one mistake can damage your ceilings or lead to significant injury to oneself. Following these things are validated to be fine, then, the next step is to start preparing the roofing. New 1×4 timber strips have to be installed horizontally and vertically every 24 inches across the roofing plane on the flat from bottom to top. It’s highly advised to use wood screws to attach the new 1 x 4 timber strips. Following this is complete along with a holistic approach to the entire roof, then, it is time to install the roof panels.
metal roofs final touch
Be mindful that all roof penetrations will have to be flashed with flashing boots which will work together with the metallic panel chosen for the roofing program. In this step, picking the metallic panel is vital to the longevity of roof life. You will find metal panels which screw through to that would on the surface of the metal that is simply nothing more than just fancy barn tin. The problem with elaborate barn tin panels is that the rubber washers overtime will dry rot and fail, thus, creating a roof leak that may undermine all the reason a metallic roof has been chosen to begin with.
An easy approach to avoid the face screwed roofing material is to use a hidden fastener metal plank. These kinds of panels are known as standing metal seam. It’s highly recommended when picking a metal roofing to consider longevity. Succinctly expressed, a hidden fastener panel is going to last the entire life of this metal with minimal chance of leaks other than failing roof penetrations over time.This is normal to all roofing types.