Metal Mart Roofing Albuquerque – If this is so, then you are going to discover there are lots of options available in the roofing industry. These choices can vary from several variations of asphalt shingle kinds to a lot of versions of alloy panels. One of the numerous questions that are presented to an expert contractor would be ” can metal roof be set up over shingles?” . We’ll analyze these measures in greater detail to help determine if retrofitting a metallic roof over an existing asphalt shingle roof is a complex idea.
There are numerous things you must consider before choosing to put in a metal panel roof over an existing asphalt shingle roof. The very first thing that has to be determined is if the roof plywood or plank board decking is secure and solid underneath the existing roof. Essentially, the roof tiling shouldn’t be ruined by water entering the old roofing at any pinhole or some additional penetration inside the field of the roof. This will require a small investigative work before installing the new metal roofing. It is highly recommended, to inspect all of roof decking and framing out of the attic side of the roofing.
galvanized steel decking metalmart
One has to look for dark spots, moldy spots, water trails on roof or plywood tiling, and or some cracked or split rafters. This should be performed with great care, for a single mistake can damage your ceilings or lead to significant injury to oneself. New 1×4 wood strips must be installed vertically and horizontally every 24 inches throughout the roofing plane on the flat from bottom to top. Following this is complete and a holistic approach to the whole roof, then, now is the time to put in the roof panels.
roofing albuquerque nm best
Be cautious that all roof penetrations might have to be flashed with flashing boots that will work together with the metallic panel chosen for the roofing application. In this step, choosing the metallic panel is critical to the longevity of roof life. You will find metal panels that float to this would on the face of the metal that’s simply nothing more than fancy barn tin. The problem with elaborate barn tin panels is that the rubber washers overtime will dry rust and fail, thus, creating a roof leak that can undermine all of the reason a metallic roof has been chosen to begin with.
A straightforward way to avert the face screwed roofing stuff would be to use a concealed fastener metal plank. These kinds of panels are known as standing metal seam. It is highly recommended when choosing a metal roofing to think about durability. Succinctly expressed, a concealed fastener panel will last the whole life of the alloy with minimal likelihood of leaks other than failing roof penetrations over time.This is normal to all roofing types.