Standing Seam Metal Roof Hatch Pattern – Are you in the market for a new roof? If this is so, then you will discover there are many options available in the roofing market. These options can range from multiple variations of asphalt shingle kinds to many variations of metal panels. One of the numerous questions that are introduced to an expert contractor is ” can metal roof be installed over shingles?” . We will analyze these steps in greater detail to help determine if retrofitting a metal roof over an present asphalt shingle roof is an innovative idea.
There are several things you must consider before choosing to install a metal panel roof over an present asphalt shingle roof. The very first thing that has to be determined is if the roof plywood or board board decking is solid and secure beneath the current roof. Essentially, the roof decking should not be ruined by water entering the old roof in any pinhole or any additional penetration within the subject of the roof. This will require a little investigative work prior to installing the new metal roof. It’s highly recommended, to inspect all of roof decking and framing out of the attic side of this roof.
standing seam roof hatch
One must look for dark spots, moldy spots, water paths on roof or plywood decking, and or any cracked or split rafters. This should be performed with great care, for one error can damage your ceilings or lead to significant harm to oneself. New 1×4 wood strips have to be installed horizontally and vertically every 24 inches throughout the roof plane on the horizontal from bottom to top. Following this is complete along with a holistic approach to the whole roof, then, it is time to install the roof panels.
metal standing seam roof
Be mindful that all roof penetrations might need to be flashed with flashing glasses that will work with the metal panel selected for the roofing program. Within this step, picking the metal panel is critical to the wellbeing of roof lifetime. You will find metal panels that screw through to that would on the face of the metal that’s simply nothing more than just fancy barn tin. The problem with elaborate barn tin panels is that the rubber dishwashers will dry rot and fail, thus, developing a roof leak that can undermine all the reason a metal roof has been selected to begin with.
An easy way to avoid the face screwed roofing material is to use a concealed fastener metal plank. These kinds of panels are known as standing metal seam. It’s highly recommended when picking a metal roof to consider durability. Succinctly expressed, a concealed fastener panel is going to last the whole life of this metal with minimal likelihood of leaks other than failing roof penetrations over time.This is normal to all roof types.