Metal Roofs For Older Mobile Homes – Are you in the market for a new roof? If this is so, then you are going to discover there are many alternatives available in the roofing industry. These choices can vary from multiple variants of asphalt shingle types to many variations of alloy panels. One of the numerous questions that are introduced to a professional contractor is ” can metal roofing be installed over shingles?” . The simple answer is yes. The dichotomous nature of installing metal within an existing shingle roof requires many steps. We’ll analyze these steps in greater detail to help determine if retrofitting a metal roof over an existing asphalt shingle roof is an innovative idea.
There are several things you should consider before choosing to put in a metal panel roof over an existing asphalt shingle roof. The very first thing that must be determined is if the roof plywood or plank board decking is secure and solid beneath the current roof. Basically, the roof tiling shouldn’t be damaged by water entering the old roofing in any pinhole or some additional penetration within the subject of the roof. This will require a little investigative work before installing the new metal roofing. It is highly recommended, to inspect all of roof decking and framing from the attic side of this roofing.
pictures of metal roofs
One must look for dark spots, moldy spots, water paths on roof or plywood tiling, and or some cracked or split rafters. This should be done with good care, for a single error can damage your ceilings or lead to significant harm to oneself. New 1×4 wood strips must be installed vertically and horizontally every 24 inches throughout the roofing plane on the flat from bottom to top. It is highly recommended to use wood screws to attach the new 1 x 4 wood strips. After this is complete and a holistic approach to the entire roof, then, now is the time to put in the roofing panels.
metal roofing for manufactured
Be cautious that all roof penetrations might need to be flashed with flashing boots that will work together with the metal panel chosen for the roofing program. Within this step, picking the metal panel is critical to the wellbeing of roof life. You will find metal panels that float to this would on the surface of the metal that’s simply nothing more than just fancy barn tin. The problem with fancy barn tin panels is that the rubber dishwashers will dry rot and fail, thus, developing a roof leak that may undermine all the reason a metal roof was chosen to begin with.
An easy approach to avoid the face screwed roofing material is to use a concealed fastener metal panel. These types of panels are known as standing metal seam. It is highly recommended when picking a metal roofing to consider durability. Succinctly expressed, a concealed fastener panel is going to last the entire life of this alloy with minimal likelihood of leaks other than failing roof penetrations over time.This is normal to all roofing types.