Energy Star Metal Roofing Tax Credit – Are you currently in the market for a new roof? If so, then you will find there are many alternatives available in the roofing industry. These choices can range from several variations of asphalt shingle types to many variations of metal panels. One of the numerous questions which are presented to an expert contractor would be ” can metal roof be set up over shingles?” . The dichotomous nature of installing metal over an present shingle roof requires many steps. We will analyze these steps in greater detail to help determine if retrofitting a metal roof over an present asphalt shingle roof is a complex idea.
There are numerous things you should consider before deciding to put in a metal panel roof over an present asphalt shingle roof. The very first thing that must be determined is if the roof plywood or board board decking is solid and secure underneath the current roof. Essentially, the roof tiling shouldn’t be ruined by water entering the old roof at any pinhole or some other penetration inside the subject of the roof. This will require a little investigative work before installing the new metal roof. It’s highly recommended, to inspect all of roof decking and framing out of the attic side of the roof.
new roof tax credit
One must search for dark spots, moldy spots, water trails on plywood or roof tiling, and or some cracked or split rafters. This should be done with good care, for one mistake can harm your ceilings or lead to substantial injury to oneself. New 1×4 wood strips must be installed vertically and horizontally every 24 inches throughout the roof plane on the flat from bottom to top. It’s highly advised to use wood screws to attach the new 1 x 4 wood strips. After this is complete and a holistic approach to the whole roof, then, it is time to put in the roof panels.
metal roofing tax credit
Be mindful that all roof penetrations might need to be flashed with flashing glasses which will work with the metal panel selected for the roofing application. Within this step, choosing the metal panel is critical to the wellbeing of roof life. There are metal panels which float to that would on the surface of the metal that’s simply nothing more than fancy barn tin. The problem with elaborate barn tin panels is that the rubber dishwashers will dry rot and fail, thus, creating a roof leak that may undermine all of the reason a metal roof was selected to start with.
A straightforward approach to avoid the face stained roof stuff would be to use a concealed fastener metal panel. These types of panels are called standing metal seam. It’s highly recommended when choosing a metal roof to consider longevity. Succinctly expressed, a concealed fastener panel will last the whole life of the metal with minimal likelihood of leaks aside from failing roof penetrations over time.This is ordinary to all roof types.