S5 Metal Roof Clamps – If so, then you will find there are many alternatives available in the roofing industry. These options can range from several variants of asphalt shingle types to many versions of alloy panels. One of the numerous questions that are presented to a professional contractor would be ” can metal roof be installed over shingles?” . The simple answer is yes. The dichotomous nature of installing metal over an present shingle roof requires many steps. We’ll analyze these steps in greater detail to help determine if retrofitting a metal roof over an present asphalt shingle roof is a complex idea.
There are numerous things you must consider before deciding to install a metal panel roof over an present asphalt shingle roof. The first thing that must be determined is if the roof plywood or board board decking is secure and solid beneath the current roof. Basically, the roof tiling shouldn’t be ruined by water entering the old roofing at any pinhole or some other penetration within the field of the roof. This may require a little investigative work prior to installing the new metal roofing. It is highly recommended, to inspect all roof decking and framing from the attic side of the roofing.
metal roof mounting solutions
One has to search for dark spots, moldy spots, water paths on roof or plywood tiling, and or some cracked or cracked rafters. This needs to be performed with good care, for one mistake can harm your ceilings or cause significant harm to oneself. Following these items have been validated to be fine, then, the next step is to start preparing the roofing. New 1×4 wood strips must be installed vertically and horizontally every 24 inches across the roofing plane on the horizontal from bottom to top. It is highly recommended to use wood screws to attach the new 1 x 4 wood strips. Following this is complete along with a holistic approach to the entire roof, then, it is time to install the roof panels.
metal roof mounting solutions
Be cautious that all roof penetrations might need to be flashed with flashing boots that will work with the metal panel selected for the roofing application. In this step, picking the metal panel is critical to the longevity of roof life. There are metal panels that float to this would on the face of the metal that is simply nothing more than just fancy barn tin. The issue with fancy barn tin panels is that the rubber dishwashers will dry rust and fail, thus, developing a roof leak that may undermine all of the reason a metal roof has been selected to begin with.
An easy way to avoid the face screwed roofing stuff would be to use a hidden fastener metal plank. These types of panels are called standing metal seam. It is highly recommended when picking a metal roofing to consider durability. Succinctly expressed, a hidden fastener panel will last the entire life of the alloy with minimal likelihood of leaks other than failing roof penetrations over time.This is ordinary to all roofing types.