Metal Roofing Baton Rouge Louisiana – Are you in the market for a new roof? If so, then you will find there are many alternatives available in the roofing market. These options can range from multiple variations of asphalt shingle kinds to many variations of metal panels. One of the many questions which are introduced to an expert contractor would be ” can metal roof be set up over shingles?” . The simple answer is yes. The dichotomous nature of installing metal over an existing shingle roof requires many actions. We will examine these steps in greater detail to help determine if retrofitting a metal roof over an existing asphalt shingle roof is an innovative idea.
There are numerous things you must consider before choosing to install a metal panel roof over an existing asphalt shingle roof. The first thing that must be determined is if the roof plywood or plank board decking is solid and secure beneath the current roof. Basically, the roof decking should not be damaged by water entering the old roofing in any pinhole or some additional penetration within the subject of the roof. This may require a small investigative work before installing the new metal roofing. It is highly recommended, to inspect all roof decking and framing from the attic side of the roofing.
types of roofs is
One must search for dark stains, moldy stains, water paths on plywood or roof decking, and or some cracked or cracked rafters. This should be done with great care, for a single error can harm your ceilings or cause significant harm to oneself. New 1×4 timber strips must be installed vertically and horizontally every 24 inches across the roofing plane on the horizontal from bottom to top. It is highly recommended to use wood screws to attach the newest 1 x 4 timber strips. After this is complete and a holistic approach to the entire roof, then, now is the time to install the roof panels.
metal roofing repair and
Be cautious that all roof penetrations will have to be flashed with flashing boots which will work with the metal panel selected for the roofing application. In this step, choosing the metal panel is vital to the wellbeing of roof life. There are metal panels which screw through to this would on the surface of the metal that is simply nothing more than fancy barn tin. The issue with elaborate barn tin panels is that the rubber washers overtime will dry rot and neglect, thus, developing a roof leak that can undermine all the reason a metal roof has been selected to start with.
A straightforward way to avoid the face screwed roofing material would be to use a hidden fastener metal panel. These kinds of panels are called standing metal seam. It is highly recommended when choosing a metal roofing to consider durability. Succinctly expressed, a hidden fastener panel is going to last the entire life of the metal with minimal likelihood of leaks aside from failing roof penetrations over time.This is normal to all roofing types.