Standing Seam Metal Roof Gutter Detail – Are you in the market for a new roof? If so, then you are going to discover there are many options available in the roofing market. These choices can range from multiple variants of asphalt shingle types to many variations of metal panels. One of the numerous questions which are presented to a professional contractor is ” can metal roofing be installed over shingles?” . The easy answer is yes. The dichotomous nature of installing metal within an present shingle roof requires many steps. We’ll examine these steps in greater detail to help determine if retrofitting a metallic roof over an present asphalt shingle roof is an innovative idea.
warranted una clad uc
There are several things you must consider before choosing to install a metal panel roof over an present asphalt shingle roof. The first thing that must be determined is if the roof plywood or board board decking is solid and secure beneath the existing roof. Basically, the roof tiling should not be ruined by water entering the old roofing at any pinhole or any additional penetration inside the field of the roof. This may require a small investigative work prior to installing the new metal roofing. It is highly recommended, to inspect all roof decking and framing from the attic side of the roofing.
warranted una clad uc
One must search for dark stains, moldy stains, water paths on roof or plywood tiling, and or any cracked or cracked rafters. This should be done with good care, for one mistake can damage your ceilings or lead to significant injury to oneself. Following these things are validated to be okay, then, the next step is to begin preparing the roofing. New 1×4 wood strips must be installed vertically and horizontally every 24 inches across the roofing plane on the horizontal from bottom to top. Following this is complete along with a holistic approach to the entire roof, then, it is time to install the roofing panels.
Be mindful that all roof penetrations will need to be flashed with flashing boots which will work with the metallic panel selected for the roofing application. In this step, choosing the metallic panel is vital to the wellbeing of roof lifetime. You will find metal panels which screw through to that would on the surface of the metal that is simply nothing more than just fancy barn tin. The issue with fancy barn tin panels is that the rubber dishwashers will dry rot and fail, thus, creating a roof leak that may undermine all of the reason a metallic roof has been selected to begin with.
A straightforward way to avoid the face stained roof stuff is to use a concealed fastener metal plank. These types of panels are known as standing metal seam. It is highly recommended when choosing a metal roofing to consider longevity. Succinctly expressed, a concealed fastener panel will last the entire life of the metal with minimal likelihood of leaks aside from failing roof penetrations over time.This is ordinary to all roofing types.