Metal Roofing Contractors Augusta Ga – Are you currently in the market for a new roof? If so, then you will discover there are lots of alternatives out there in the roofing industry. These choices can vary from several variants of asphalt shingle types to many variations of alloy panels. Among the many questions that are introduced to an expert contractor is ” can metal roofing be installed over shingles?” . The easy answer is yes. We’ll analyze these steps in greater detail to help determine if retrofitting a metal roof over an present asphalt shingle roof is an innovative idea.
There are numerous things you should consider before deciding to install a metal panel roof over an present asphalt shingle roof. The very first thing that has to be determined is if the roof plywood or plank board decking is secure and solid beneath the existing roof. Basically, the roof tiling should not be ruined by water entering the old roofing in any pinhole or some additional penetration within the subject of the roof. This will require a little investigative work before installing the new metal roofing. It is highly recommended, to inspect all of roof decking and framing out of the attic side of the roofing.
macon metal roofing roofing
One has to search for dark spots, moldy spots, water trails on roof or plywood tiling, and or some cracked or split rafters. This should be performed with good care, for a single error can damage your ceilings or lead to significant harm to oneself. Following these things are validated to be okay, then, the next step is to start preparing the roofing. New 1×4 wood strips must be installed horizontally and vertically every 24 inches across the roofing plane on the flat from bottom to top. Following this is complete and a holistic approach to the entire roof, then, it is time to install the roofing panels.
red metal roof paint
Be cautious that all roof penetrations might need to be flashed with flashing boots that will work with the metal panel selected for the roofing application. In this step, picking the metal panel is vital to the longevity of roof lifetime. There are metal panels that screw through to that would on the face of the metal that’s simply nothing more than just fancy barn tin. The issue with elaborate barn tin panels is that the rubber washers overtime will dry rot and neglect, thus, developing a roof leak that may undermine all the reason a metal roof was selected to begin with.
An easy way to avert the face screwed roofing material is to use a hidden fastener metal plank. These types of panels are called standing metal seam. It is highly recommended when picking a metal roofing to think about durability. Succinctly expressed, a hidden fastener panel is going to last the entire life of the alloy with minimal likelihood of leaks aside from failing roof penetrations over time.This is ordinary to all roofing types.