Baker Metal Works Roofing – If this is so, then you will discover there are lots of alternatives available in the roofing market. These options can range from multiple variations of asphalt shingle types to a lot of variations of metal panels. One of the many questions that are introduced to an expert contractor is ” can metal roofing be installed over shingles?” . The dichotomous nature of installing metal within an existing shingle roof requires lots of actions. We will analyze these steps in greater detail to help determine if retrofitting a metal roof over an existing asphalt shingle roof is an innovative idea.
san antonio roofing company
There are several things you must consider before choosing to put in a metal panel roof over an existing asphalt shingle roof. The very first thing that has to be determined is if the roof plywood or board board decking is solid and secure underneath the existing roof. Essentially, the roof decking shouldn’t be damaged by water entering the old roof at any pinhole or some other penetration inside the field of the roof. This may require a little investigative work before installing the new metal roof. It is highly recommended, to inspect all roof decking and framing from the attic side of the roof.
roofing nashville nc roofing
One has to search for dark stains, moldy stains, water paths on roof or plywood decking, and or some cracked or cracked rafters. This should be performed with great care, for one mistake can damage your ceilings or cause substantial injury to oneself. New 1×4 timber strips have to be installed vertically and horizontally every 24 inches across the roof plane on the flat from bottom to top. Following this is complete and a holistic approach to the whole roof, then, it is time to put in the roofing panels.
Be mindful that all roof penetrations will have to be flashed with flashing boots that will work with the metal panel selected for the roofing program. Within this step, picking the metal panel is critical to the wellbeing of roof life. There are metal panels that float to that would on the surface of the metal that’s simply nothing more than fancy barn tin. The issue with elaborate barn tin panels is that the rubber dishwashers will dry rot and neglect, thus, developing a roof leak that may undermine all the reason a metal roof was selected to start with.
A straightforward way to avoid the face screwed roofing stuff is to use a hidden fastener metal panel. These types of panels are known as standing metal seam. It is highly recommended when picking a metal roof to consider longevity. Succinctly expressed, a hidden fastener panel will last the whole life of the metal with minimal likelihood of leaks other than failing roof penetrations over time.This is normal to all roof types.