Atas Metal Roof Colors – If this is so, then you will find there are many options available in the roofing market. These choices can vary from several variations of asphalt shingle kinds to many variations of alloy panels. One of the numerous questions that are introduced to a professional contractor is ” can metal roof be set up over shingles?” . The dichotomous nature of installing metal over an existing shingle roof requires many steps. We will examine these steps in greater detail to help determine if retrofitting a metal roof over an existing asphalt shingle roof is an innovative idea.
There are several things you should consider before choosing to install a metal panel roof over an existing asphalt shingle roof. The first thing that has to be determined is if the roof plywood or board board decking is solid and secure underneath the existing roof. Essentially, the roof decking should not be damaged by water entering the old roofing at any pinhole or some additional penetration inside the field of the roof. This will require a little investigative work prior to installing the new metal roofing. It is highly recommended, to inspect all of roof decking and framing out of the attic side of this roofing.
metal roofing panel colored
One must search for dark spots, moldy spots, water trails on plywood or roof decking, and or some cracked or cracked rafters. This should be done with great care, for a single mistake can damage your ceilings or cause substantial harm to oneself. New 1×4 wood strips must be installed horizontally and vertically every 24 inches throughout the roofing plane on the horizontal from bottom to top. It is highly recommended to use wood screws to attach the newest 1 x 4 wood strips. Following this is complete and a holistic approach to the entire roof, then, it is time to install the roof panels.
metal roofing panel standing
Be mindful that all roof penetrations will need to be flashed with flashing boots that will work with the metal panel selected for the roofing program. In this step, picking the metal panel is critical to the wellbeing of roof life. You will find metal panels that screw through to this would on the face of the metal that is simply nothing more than fancy barn tin. The problem with elaborate barn tin panels is that the rubber washers overtime will dry rot and neglect, thus, creating a roof leak that may undermine all the reason a metal roof has been selected to begin with.
A straightforward way to avert the face screwed roofing stuff is to use a hidden fastener metal plank. These kinds of panels are known as standing metal seam. It is highly recommended when picking a metal roofing to think about longevity. Succinctly expressed, a hidden fastener panel is going to last the entire life of this alloy with minimal chance of leaks other than failing roof penetrations over time.This is ordinary to all roofing types.