Ribbed Metal Roofing Colors – Are you in the market for a new roof? If so, then you will discover there are lots of alternatives available in the roofing industry. These choices can range from multiple variations of asphalt shingle kinds to many variations of alloy panels. One of the numerous questions which are presented to a professional contractor is ” can metal roof be installed over shingles?” . The easy answer is yes. We will analyze these measures in greater detail to help determine if retrofitting a metallic roof over an existing asphalt shingle roof is an innovative idea.
There are numerous things you must consider before deciding to put in a metal panel roof over an existing asphalt shingle roof. The first thing that has to be determined is if the roof plywood or plank board decking is solid and secure beneath the current roof. Essentially, the roof decking shouldn’t be ruined by water entering the old roofing in any pinhole or any additional penetration inside the subject of the roof. This may require a little investigative work before installing the new metal roofing. It is highly recommended, to inspect all of roof decking and framing from the attic side of this roofing.
metal roofing with many
One must look for dark spots, moldy spots, water trails on plywood or roof decking, and or any cracked or cracked rafters. This needs to be performed with great care, for one mistake can harm your ceilings or lead to substantial harm to oneself. New 1×4 timber strips must be installed vertically and horizontally every 24 inches across the roofing plane on the flat from bottom to top. It is highly advised to use wood screws to attach the new 1 x 4 timber strips. After this is complete and a holistic approach to the whole roof, then, it is time to put in the roof panels.
colors of corrugated metal
Be cautious that all roof penetrations will have to be flashed with flashing glasses which will work with the metallic panel chosen for the roofing program. In this step, choosing the metallic panel is critical to the longevity of roof life. There are metal panels which screw through to that would on the surface of the metal that’s simply nothing more than fancy barn tin. The issue with elaborate barn tin panels is that the rubber washers overtime will dry rot and fail, thus, developing a roof leak that may undermine all the reason a metallic roof was chosen to start with.
An easy approach to avoid the face screwed roofing material is to use a concealed fastener metal plank. These kinds of panels are called standing metal seam. It is highly recommended when choosing a metal roofing to consider durability. Succinctly expressed, a concealed fastener panel will last the whole life of this alloy with minimal chance of leaks aside from failing roof penetrations over time.This is ordinary to all roofing types.