Higgins Metal Roofing Colors – Are you currently in the market for a new roof? If so, then you will find there are many options available in the roofing industry. These options can range from several variations of asphalt shingle kinds to a lot of variations of alloy panels. One of the many questions which are introduced to an expert contractor would be ” can metal roof be installed over shingles?” . The simple answer is yes. The dichotomous nature of installing metal over an present shingle roof requires many actions. We will examine these steps in greater detail to help determine if retrofitting a metal roof over an present asphalt shingle roof is an innovative idea.
There are several things you should consider before choosing to install a metal panel roof over an present asphalt shingle roof. The first thing that has to be determined is if the roof plywood or plank board decking is solid and secure underneath the current roof. Basically, the roof decking shouldn’t be ruined by water entering the old roofing in any pinhole or some other penetration within the field of the roof. This may require a little investigative work prior to installing the new metal roofing. It’s highly recommended, to inspect all roof decking and framing out of the attic side of this roofing.
standing seam metal roof
One must search for dark spots, moldy spots, water paths on plywood or roof decking, and or some cracked or split rafters. This should be performed with great care, for one mistake can harm your ceilings or cause substantial harm to oneself. Following these items are validated to be okay, then, the next step is to start preparing the roofing. New 1×4 timber strips have to be installed horizontally and vertically every 24 inches across the roofing plane on the flat from bottom to top. It’s highly recommended to use wood screws to attach the new 1 x 4 timber strips. Following this is complete along with a holistic approach to the entire roof, then, now is the time to install the roof panels.
standing seam metal roof
Be cautious that all roof penetrations might have to be flashed with flashing glasses which will work together with the metal panel selected for the roofing program. Within this step, picking the metal panel is vital to the wellbeing of roof lifetime. You will find metal panels which screw through to this would on the surface of the metal that is simply nothing more than fancy barn tin. The issue with elaborate barn tin panels is that the rubber dishwashers will dry rot and fail, thus, developing a roof leak that can undermine all the reason a metal roof was selected to start with.
An easy approach to avoid the face stained roof material would be to use a concealed fastener metal plank. These kinds of panels are known as standing metal seam. It’s highly recommended when picking a metal roofing to think about longevity. Succinctly expressed, a concealed fastener panel will last the entire life of this alloy with minimal likelihood of leaks other than failing roof penetrations over time.This is ordinary to all roofing types.