Metal Roofing Athens Georgia – Are you in the market for a new roof? If so, then you will discover there are many options available in the roofing market. These options can range from multiple variations of asphalt shingle kinds to a lot of variations of metal panels. Among the numerous questions which are presented to a professional contractor is ” can metal roofing be installed over shingles?” . We’ll analyze these steps in greater detail to help determine if retrofitting a metallic roof over an present asphalt shingle roof is an innovative idea.
There are several things you must consider before choosing to put in a metal panel roof over an present asphalt shingle roof. The first thing that has to be determined is if the roof plywood or plank board decking is secure and solid beneath the current roof. Basically, the roof tiling shouldn’t be damaged by water entering the old roofing at any pinhole or some additional penetration inside the field of the roof. This may require a little investigative work prior to installing the new metal roofing. It is highly recommended, to inspect all of roof decking and framing out of the attic side of the roofing.
metal roofing athens ga
One has to look for dark spots, moldy spots, water trails on roof or plywood tiling, and or some cracked or split rafters. This should be done with good care, for a single error can damage your ceilings or lead to significant harm to oneself. New 1×4 timber strips must be installed vertically and horizontally every 24 inches throughout the roofing plane on the flat from bottom to top. Following this is complete and a holistic approach to the whole roof, then, it is time to put in the roofing panels.
metal roofing athens ga
Be mindful that all roof penetrations might need to be flashed with flashing glasses which will work with the metallic panel selected for the roofing application. In this step, picking the metallic panel is vital to the wellbeing of roof life. There are metal panels which screw through to this would on the surface of the metal that’s simply nothing more than fancy barn tin. The problem with elaborate barn tin panels is that the rubber dishwashers will dry rust and neglect, thus, developing a roof leak that can undermine all of the reason a metallic roof was selected to start with.
An easy way to avoid the face screwed roofing stuff is to use a concealed fastener metal plank. These kinds of panels are called standing metal seam. It is highly recommended when picking a metal roofing to think about longevity. Succinctly expressed, a concealed fastener panel is going to last the whole life of the metal with minimal chance of leaks aside from failing roof penetrations over time.This is ordinary to all roofing types.