Colors And Styles Of Metal Roofing – Are you currently in the market for a new roof? If this is so, then you are going to find there are lots of options out there in the roofing industry. These options can range from several variants of asphalt shingle types to many versions of metal panels. One of the numerous questions that are introduced to a professional contractor is ” can metal roof be set up over shingles?” . The simple answer is yes. We will analyze these measures in greater detail to help determine if retrofitting a metal roof over an existing asphalt shingle roof is a complex idea.
There are several things you must consider before choosing to put in a metal panel roof over an existing asphalt shingle roof. The first thing that must be determined is if the roof plywood or board board decking is secure and solid underneath the current roof. Basically, the roof tiling should not be ruined by water entering the old roofing in any pinhole or any additional penetration within the subject of the roof. This will require a small investigative work prior to installing the new metal roofing. It’s highly recommended, to inspect all roof decking and framing from the attic side of this roofing.
metal roof colors and
One has to search for dark spots, moldy spots, water paths on plywood or roof tiling, and or any cracked or split rafters. This needs to be performed with great care, for a single error can harm your ceilings or cause significant injury to oneself. After these items have been validated to be fine, then, the next step is to start preparing the roofing. New 1×4 timber strips have to be installed vertically and horizontally every 24 inches throughout the roofing plane on the flat from bottom to top. It’s highly recommended to use wood screws to attach the newest 1 x 4 timber strips. After this is complete along with a holistic approach to the whole roof, then, it is time to put in the roof panels.
metal roof styles and
Be mindful that all roof penetrations might need to be flashed with flashing boots that will work together with the metal panel selected for the roofing application. In this step, choosing the metal panel is vital to the wellbeing of roof lifetime. There are metal panels that screw through to this would on the surface of the metal that’s simply nothing more than just fancy barn tin. The problem with elaborate barn tin panels is that the rubber dishwashers will dry rot and fail, thus, developing a roof leak that may undermine all of the reason a metal roof was selected to start with.
A straightforward way to avoid the face stained roof stuff is to use a concealed fastener metal panel. These types of panels are called standing metal seam. It’s highly recommended when choosing a metal roofing to consider longevity. Succinctly expressed, a concealed fastener panel will last the whole life of this metal with minimal chance of leaks other than failing roof penetrations over time.This is normal to all roofing types.