Copper Penny Metal Roof Pictures – Are you in the market for a new roof? If so, then you will discover there are many alternatives available in the roofing market. These choices can range from several variants of asphalt shingle types to many variations of metal panels. One of the numerous questions which are presented to a professional contractor would be ” can metal roofing be installed over shingles?” . We’ll examine these measures in greater detail to help determine if retrofitting a metallic roof over an existing asphalt shingle roof is an innovative idea.
There are several things you should consider before deciding to put in a metal panel roof over an existing asphalt shingle roof. The first thing that has to be determined is if the roof plywood or plank board decking is secure and solid underneath the existing roof. Basically, the roof decking should not be ruined by water entering the old roofing in any pinhole or some other penetration inside the subject of the roof. This may require a little investigative work before installing the new metal roofing. It is highly recommended, to inspect all roof decking and framing from the attic side of this roofing.
building showcase garage with
One must look for dark stains, moldy stains, water paths on plywood or roof decking, and or some cracked or cracked rafters. This needs to be done with great care, for one mistake can damage your ceilings or lead to substantial injury to oneself. New 1×4 timber strips have to be installed vertically and horizontally every 24 inches across the roofing plane on the flat from bottom to top. Following this is complete and a holistic approach to the whole roof, then, it is time to put in the roofing panels.
metal roof colors copper
Be cautious that all roof penetrations will need to be flashed with flashing glasses which will work together with the metallic panel selected for the roofing program. In this step, choosing the metallic panel is critical to the wellbeing of roof lifetime. There are metal panels which float to that would on the face of the metal that’s simply nothing more than just fancy barn tin. The problem with fancy barn tin panels is that the rubber washers overtime will dry rust and neglect, thus, developing a roof leak that may undermine all the reason a metallic roof has been selected to start with.
An easy way to avoid the face screwed roofing stuff would be to use a concealed fastener metal panel. These types of panels are known as standing metal seam. It is highly recommended when choosing a metal roofing to consider longevity. Succinctly expressed, a concealed fastener panel will last the whole life of this metal with minimal chance of leaks aside from failing roof penetrations over time.This is normal to all roofing types.