Metal Ridge Vent For Shingle Roof – Are you in the market for a new roof? If so, then you will discover there are lots of options out there in the roofing market. These options can vary from multiple variations of asphalt shingle kinds to many versions of alloy panels. Among the numerous questions that are presented to a professional contractor would be ” can metal roofing be set up over shingles?” . We’ll examine these measures in greater detail to help determine if retrofitting a metallic roof over an present asphalt shingle roof is an innovative idea.
There are numerous things you must consider before choosing to put in a metal panel roof over an present asphalt shingle roof. The first thing that has to be determined is if the roof plywood or board board decking is solid and secure beneath the existing roof. Basically, the roof decking should not be damaged by water entering the old roofing at any pinhole or some additional penetration within the subject of the roof. This may require a little investigative work before installing the new metal roofing. It is highly recommended, to inspect all of roof decking and framing from the attic side of this roofing.
roof cap vent installation
One must look for dark stains, moldy stains, water trails on roof or plywood decking, and or some cracked or split rafters. This needs to be performed with good care, for a single error can harm your ceilings or cause substantial injury to oneself. New 1×4 wood strips have to be installed horizontally and vertically every 24 inches across the roofing plane on the flat from bottom to top. It is highly recommended to use wood screws to attach the newest 1 x 4 wood strips. Following this is complete along with a holistic approach to the whole roof, then, it is time to put in the roofing panels.
installing a roof ridge
Be cautious that all roof penetrations might need to be flashed with flashing glasses that will work together with the metallic panel chosen for the roofing program. In this step, choosing the metallic panel is critical to the longevity of roof life. You will find metal panels that screw through to that would on the surface of the metal that is simply nothing more than just fancy barn tin. The issue with fancy barn tin panels is that the rubber dishwashers will dry rot and neglect, thus, creating a roof leak that may undermine all the reason a metallic roof was chosen to begin with.
An easy approach to avert the face stained roof stuff would be to use a hidden fastener metal plank. These kinds of panels are called standing metal seam. It is highly recommended when choosing a metal roofing to consider longevity. Succinctly expressed, a hidden fastener panel will last the whole life of this alloy with minimal likelihood of leaks other than failing roof penetrations over time.This is ordinary to all roofing types.