Burnished Slate Metal Roof Images – Are you in the market for a new roof? If this is so, then you are going to discover there are lots of options available in the roofing market. These choices can vary from several variations of asphalt shingle types to a lot of versions of alloy panels. One of the numerous questions that are introduced to a professional contractor is ” can metal roof be installed over shingles?” . The easy answer is yes. We will examine these measures in greater detail to help determine if retrofitting a metal roof over an existing asphalt shingle roof is an innovative idea.
There are several things you must consider before deciding to put in a metal panel roof over an existing asphalt shingle roof. The first thing that has to be determined is if the roof plywood or board board decking is solid and secure underneath the existing roof. Basically, the roof tiling shouldn’t be damaged by water entering the old roof in any pinhole or some additional penetration inside the subject of the roof. This will require a little investigative work prior to installing the new metal roof. It is highly recommended, to inspect all roof decking and framing from the attic side of this roof.
5 star roofing a
One has to search for dark stains, moldy stains, water paths on roof or plywood tiling, and or some cracked or split rafters. This needs to be performed with great care, for a single mistake can damage your ceilings or cause substantial harm to oneself. New 1×4 timber strips must be installed horizontally and vertically every 24 inches across the roof plane on the horizontal from bottom to top. It is highly advised to use wood screws to attach the new 1 x 4 timber strips. Following this is complete and a holistic approach to the entire roof, then, now is the time to put in the roof panels.
burnished slate metal roof
Be cautious that all roof penetrations will need to be flashed with flashing glasses that will work with the metal panel chosen for the roofing application. Within this step, choosing the metal panel is vital to the wellbeing of roof life. There are metal panels that screw through to that would on the face of the metal that is simply nothing more than fancy barn tin. The issue with elaborate barn tin panels is that the rubber dishwashers will dry rust and fail, thus, developing a roof leak that can undermine all the reason a metal roof was chosen to begin with.
A straightforward approach to avoid the face screwed roofing stuff is to use a hidden fastener metal plank. These types of panels are called standing metal seam. It is highly recommended when choosing a metal roof to think about longevity. Succinctly expressed, a hidden fastener panel will last the entire life of this alloy with minimal likelihood of leaks aside from failing roof penetrations over time.This is ordinary to all roof types.