Standing Seam Metal Roof Grand Rapids Mi – Are you currently in the market for a new roof? If so, then you are going to find there are many alternatives available in the roofing market. These options can range from multiple variants of asphalt shingle types to a lot of versions of metal panels. One of the numerous questions that are introduced to a professional contractor would be ” can metal roof be set up over shingles?” . The dichotomous nature of installing metal over an present shingle roof requires many actions. We’ll analyze these steps in greater detail to help determine if retrofitting a metal roof over an present asphalt shingle roof is a complex idea.
There are numerous things you must consider before deciding to put in a metal panel roof over an present asphalt shingle roof. The very first thing that has to be determined is if the roof plywood or board board decking is solid and secure underneath the current roof. Essentially, the roof tiling shouldn’t be ruined by water entering the old roof in any pinhole or any additional penetration within the field of the roof. This may require a little investigative work prior to installing the new metal roof. It is highly recommended, to inspect all of roof decking and framing out of the attic side of this roof.
metal standing seam roof
One must look for dark spots, moldy spots, water trails on plywood or roof tiling, and or any cracked or cracked rafters. This should be performed with great care, for one error can harm your ceilings or cause significant injury to oneself. Following these items have been validated to be fine, then, the next step is to begin preparing the roof. New 1×4 timber strips must be installed horizontally and vertically every 24 inches throughout the roof plane on the horizontal from bottom to top. It is highly recommended to use wood screws to attach the newest 1 x 4 timber strips. Following this is complete along with a holistic approach to the entire roof, then, now is the time to put in the roof panels.
metal roofing grand rapids
Be mindful that all roof penetrations might need to be flashed with flashing boots that will work with the metal panel chosen for the roofing program. In this step, choosing the metal panel is vital to the longevity of roof lifetime. You will find metal panels that screw through to this would on the surface of the metal that’s simply nothing more than just fancy barn tin. The problem with fancy barn tin panels is that the rubber washers overtime will dry rot and neglect, thus, developing a roof leak that may undermine all of the reason a metal roof was chosen to start with.
An easy approach to avoid the face stained roof material would be to use a concealed fastener metal plank. These types of panels are known as standing metal seam. It is highly recommended when choosing a metal roof to think about durability. Succinctly expressed, a concealed fastener panel is going to last the entire life of this metal with minimal likelihood of leaks other than failing roof penetrations over time.This is normal to all roof types.